Zipper Garage Coverage for Custom Hoodies: What to Specify

Mark the zipper end and the wearer side

Show whether the requested feature covers the top stop, bottom stop or both, and mark the inside and outside views. A sketch should identify the zipper tape, facing or guard layers, stitch line and the edge the wearer can touch. The word garage alone can mean different shapes to different teams; a callout removes that ambiguity.

Define the finished edge, not just the shape

State whether the piece is folded, bound or enclosed, and whether its edge must sit flat against the body. Identify any visible topstitching and its route. If the hood opening, chin or lining meets the feature, show that relationship so the sample reviewer can check bulk and comfort together.

Review movement and closure together

Inspect the zipper through its full travel and check whether the garage catches the slider, exposes a sharp component or shifts away from the marked position. Record the garment size and sample version. A close-up photograph helps compare the approved appearance, but it cannot replace operating the closure on the actual garment.

Put acceptance into the RFQ

Attach a labeled front and inside sketch, zipper reference, edge-finish instruction and an approval photo. Ask the supplier to flag any change in layer count or stitch access before sampling. Link the feature to the hoodie specification rather than leaving it as an untracked note in a chat thread.

Buyer decision record

Record the garment style, material or trim reference, sample size, revision and the question being decided. If the supplier proposes a change, ask for the changed layer order, measurement or artwork location in a marked response before treating the quote or sample as comparable.

Evidence scope

The linked references provide terminology or named-method scope only. They do not prove a MyOwnWear capability, a project result, a price, a lead time or a certification. Confirm the actual material, construction and acceptance criteria for the project.

• Coats: Seam Types — Seam terminology and construction categories only; no project workmanship result.

Use this brief in the MyOwnWear RFQ form. Include the style, quantity, current file or sample revision and the decision you need confirmed.

Next step: ask for a written feasibility response that separates confirmed inputs from supplier-proposed alternatives, then approve the relevant sample evidence.

Keep the approved drawing, measurement or photo with the quote record so the same construction can be checked at the next handoff.